Frp 591 Comes To Life panther black FRP
#181
Posted 20 February 2015 - 09:27 PM
Thanks for replying.
#182
Posted 21 February 2015 - 11:43 AM
![;)](http://www.pumapeople.com/forum/public/style_emoticons/default/wink.gif)
#183
Posted 03 March 2015 - 05:54 PM
![Posted Image](https://farm9.staticflickr.com/8592/16078523553_4ed1748965_k.jpg)
all the old parts
![Posted Image](https://farm9.staticflickr.com/8669/16697429432_343099bb2d_k.jpg)
new pump
![Posted Image](https://farm9.staticflickr.com/8653/16076153394_17bdb49941_k.jpg)
all rebuilt
![Posted Image](https://farm9.staticflickr.com/8633/16517516440_6fb43d628f_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8654/16703837792_558b860e04_k.jpg)
shiny back box
![Posted Image](https://farm9.staticflickr.com/8600/16678968236_71dab2190f_k.jpg)
centre section all masked up ready for paint
![Posted Image](https://farm9.staticflickr.com/8605/16672535716_0f9f316101_k.jpg)
#184
Posted 04 March 2015 - 05:56 PM
![Posted Image](https://farm9.staticflickr.com/8653/16688844046_db2ebe205c_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8661/16527172428_3a5015f7be_k.jpg)
looking up under the rear arch
![Posted Image](https://farm9.staticflickr.com/8626/16528628969_60e62a82e3_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8566/16688844666_0fcc267824_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8563/16713474111_69ef9e0f5e_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8618/16714760275_30f6283e32_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8622/16528630919_3ecf214419_k.jpg)
so it looks like i have a fair bit of work ahead, started on the drivers side arch today, uncovered some holes on the out side of the wind too
![Posted Image](https://farm9.staticflickr.com/8566/16714760225_a9e2907afb_k.jpg)
here is a pic of the first stages of cleaning up
![Posted Image](https://farm9.staticflickr.com/8562/16092433144_e3aeba4ab0_k.jpg)
so i know it looks pretty grim, but im confident that i can get her looking good again and be rock solid too, she will need a stop off in the body shop after the work is done but i think i can save her from this nasty state, its a pain having to work on my drive as i done have a garage or workshop
![:(](http://www.pumapeople.com/forum/public/style_emoticons/default/sad.gif)
![:)](http://www.pumapeople.com/forum/public/style_emoticons/default/smile.gif)
#185
Posted 04 March 2015 - 06:35 PM
Good luck with the strip, cut and weld I guess, please share the photos always interesting.
One of the holes you found I had documented on my rust thread. The mastic used to infil the infill rear arch to the inside of the outside panel sure does act as a water sponge and where the seam is the large ball of mastic and that I am thinking is your top most hole on the arch as I guess the shell was built up the same.
I am surprised about the holes and rust around the rear beam mount.
Good luck and lots of dry weather.
#186
Posted 04 March 2015 - 06:44 PM
#187
Posted 05 March 2015 - 06:19 PM
bare metal
![Posted Image](https://farm9.staticflickr.com/8634/16518516537_fb94a66e1e_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8580/16724556931_3130b57255_k.jpg)
first layer of gloop
![Posted Image](https://farm9.staticflickr.com/8597/16539682179_1b5d8fedbe_k.jpg)
#188
Posted 05 March 2015 - 08:21 PM
I found lots of little odd patches of rust on mine when I rubbed it down but I didn't strip the entire inside just where I found patches.
I can't quite see if you stripped it all back to bare metal.
#189
Posted 05 March 2015 - 09:29 PM
#190
Posted 06 March 2015 - 06:22 PM
![Posted Image](https://farm9.staticflickr.com/8665/16733206922_edeb42599a_k.jpg)
also got some new Hel rear brake lines, i ordered clear braided but got black, never mind they are much better than the goodridge ones i have at the mo! the problem with the goodridge ones is that there is no part to secure it to the bracket where it meets the hard line it just goes on the FRP rear hose extension, plus the out sheath has started to give way near the join, i must admit Hel are rather good, they made me up a custom set to fit my brembos when i fitted them a few years ago
proper part to secure it to the chassis
![Posted Image](https://farm9.staticflickr.com/8593/16546874250_58522441c2_k.jpg)
old vs new
![Posted Image](https://farm9.staticflickr.com/8630/16733080931_23e62a6f7d_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8583/16708390846_166f62c91d_k.jpg)
#191
Posted 06 March 2015 - 06:39 PM
Where there are holes are you welding in a fill piece?
#192
Posted 06 March 2015 - 06:58 PM
![:)](http://www.pumapeople.com/forum/public/style_emoticons/default/smile.gif)
#193
Posted 17 March 2015 - 07:50 PM
before
![Posted Image](https://farm9.staticflickr.com/8678/16538382170_9c870710b2_k.jpg)
after
![Posted Image](https://farm9.staticflickr.com/8666/16845817231_17a81818a2_k.jpg)
![Posted Image](https://farm8.staticflickr.com/7597/16639563407_738533a2e1_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8669/16821012236_d3d59d2ba1_k.jpg)
rear shocks rebuilt
![Posted Image](https://farm8.staticflickr.com/7643/16639564527_521cf99996_k.jpg)
#194
Posted 17 March 2015 - 09:45 PM
![;)](http://www.pumapeople.com/forum/public/style_emoticons/default/wink.gif)
FRP 245 - sold, then killed by new owner!
FRP 225 - sold in 2013 and regretted it ever since!FRP ??? - Now after another one after two years of Fiesta ST2 ownership.
#196
Posted 11 April 2015 - 06:51 PM
![Posted Image](https://farm8.staticflickr.com/7700/16922783500_02f2da86ea_k.jpg)
got a coat of mastic on passenger arch
![Posted Image](https://farm8.staticflickr.com/7622/17110333685_c2e8f559fe_k.jpg)
finaly finished the boot floor and got first layer of mastic on that too
![Posted Image](https://farm8.staticflickr.com/7617/17109675461_ecb0130787_k.jpg)
my cat approves of the work
![Posted Image](https://farm9.staticflickr.com/8786/16922535058_7eb53350e4_k.jpg)
there are a few areas that I haven't painted with the mastic, these areas are where new metal needs to be welded in, I will finish the new metal with mastic once it has been repaired, the plan at the moment is to get it all painted and put back together, then i will take it to my friend who will do the welding, get it MOT'd and then get the rear arches repaired and painted, once that is done i can paint the welded parts and its finished hopefully in time for the 15 year FRP meet next month, fingers crossed it will get done in time
This post has been edited by d170sam: 11 April 2015 - 06:59 PM
#197
Posted 18 April 2015 - 07:05 PM
first in to etch primer then in to underguard then another coat of etch primer ready for top coat
![Posted Image](https://farm8.staticflickr.com/7596/16980291707_b9acede32f_k.jpg)
now in top coat
![Posted Image](https://farm8.staticflickr.com/7700/17186058902_00558f3577_k.jpg)
![Posted Image](https://farm8.staticflickr.com/7596/16567530733_bcda34ad1f_k.jpg)
various bits back from electroplating
![Posted Image](https://farm9.staticflickr.com/8721/17001542939_8938a7146b_k.jpg)
put my calipers together
![Posted Image](https://farm9.staticflickr.com/8757/17187695235_a1c136112b_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8690/16999968008_35b4d2f474_k.jpg)
test fit of a few parts before final assembly on the car
![Posted Image](https://farm8.staticflickr.com/7617/16999964688_807d01bf0b_k.jpg)
lots of shiny parts and goodies to go on
![:)](http://www.pumapeople.com/forum/public/style_emoticons/default/smile.gif)
![Posted Image](https://farm9.staticflickr.com/8765/17000187210_5a36fd6be9_k.jpg)
made a start at assembly - got the rear brake lines replaced and HEL flexi hoses fitted
![Posted Image](https://farm9.staticflickr.com/8733/17188841952_2c02addeb1_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8793/16570309033_1c5b26aaa4_k.jpg)
![Posted Image](https://farm8.staticflickr.com/7624/16568064834_56619fb068_k.jpg)
hopefully get a whole heap of stuff done tomorrow, thanks for reading
#198
Posted 18 April 2015 - 09:13 PM
#199
Posted 18 April 2015 - 10:10 PM
![:)](http://www.pumapeople.com/forum/public/style_emoticons/default/smile.gif)
#200
Posted 24 April 2015 - 04:48 PM
fuel tank fitted
![Posted Image](https://farm8.staticflickr.com/7719/17207958395_a75a322cd0_k.jpg)
i got my new fuel filler hoses fitted, im really chuffed with them, they look real good, i have another set if anyone wants to buy it (the hoses came in 1M lengths so i have loads left over
![Posted Image](https://farm9.staticflickr.com/8825/16585507694_459cb87693_k.jpg)
![Posted Image](https://farm6.staticflickr.com/5461/17206294872_ed2cf35af2_k.jpg)
exhaust back on
![Posted Image](https://farm6.staticflickr.com/5459/17206289282_43a8a76e3b_k.jpg)
shocks brake lines and hand brake fitted
![Posted Image](https://farm8.staticflickr.com/7597/16615893853_761e84e404_k.jpg)
beam, spacers, splash guards, spindles, hubs, and caliper carriers fitted
![Posted Image](https://farm9.staticflickr.com/8728/17182027046_7f4dda5ad9_k.jpg)
![Posted Image](https://farm8.staticflickr.com/7723/17020213518_956348f1b5_k.jpg)
caliper test fit
![Posted Image](https://farm9.staticflickr.com/8701/17048340698_22015d8e4a_k.jpg)
![Posted Image](https://farm8.staticflickr.com/7593/16624075844_7e086d4958_k.jpg)
![Posted Image](https://farm9.staticflickr.com/8768/17244789162_0dab799dbf_k.jpg)
Thats it for the mo, just need to bleed the brakes and its drivable, the car is going to a friends garage Monday for the welding and MOT then its to another mates body shop so its looking good to be at the 15 year aniversary FRP meet (where i will literaly be the black sheep - Ha!)