Pumapeople: Ford Racing Puma No. 192 Of 500 (2000) - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Ford Racing Puma No. 192 Of 500 (2000)

#1 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 07 September 2009 - 01:30 PM

I'm assuming if you're looking at this advert you know what a Ford Racing Puma is and its specification, however if not then take a look here: www.fordracingpuma.com

Imperial blue. 2000 W reg. 71,500 miles. Build no. 192 of 500.

First registered on 14/07/2000. 6 former keepers (prior to myself). Tracker fitted.

MOT until April 3rd 2010. Tax until 31st December 2009.

Full Service History Log:

12,724 Miles - 10/12/01 – Formby Ford
20,368 Miles – 17/12/02 – Formby Ford
21,853 Miles – 18/08/03 – Evans Halshaw Ford
24,140 Miles – 05/01/04 – Ryders Ford
26,052 Miles – 13/07/04 – KMC Motorist Centre
32,289 Miles – 24/06/05 – Pumabuild
39,606 Miles – 11/01/06 – Pumaspeed
45,101 Miles – 03/02/07 – Spinney Garage
50,835 Miles – 16/10/07 – Spinney Garage
61,853 Miles – 02/08/08 – KMC Motorist Centre
71,075 Miles – 07/09/09 – JD Autos (Spark plugs & fuel filter too)

Replacement Record:

• 27,432 Miles – 04/03/05 – Pumabuild - Helix fast road clutch & bearing fitted
• 45,101 Miles – 03/02/07 – Spinney Garage – Cambelt & tensioner kit fitted (correct tool used) and stainless steel pistons fitted to Alcon front calipers.
• 68,800 Miles – 01/06/09 – Complete brake overhaul by a well known FRP Alcon expert (Chris - eldoodarino on the forums) - Caliper service (complete strip down, clean and rebuild), New Alcon front discs & Textar pads.

Bonnet, front bumper, front wings and doors resprayed (to get rid of the dreaded stone chips) in August 2008.

Four wheel laser alignment was carried out in April 2009.

The car was rolling roaded in July 2009, and made a healthy 142.1 BHP at the flywheel (116.3 BHP at the wheels). Graphs will be included in the sale.

Myself and the previous owner have had the following parts fitted within the last 18 months or so:

• Cannon front mud flaps (nice and subtle)
• OEM FRP front mats (plain black rear mats included)
• Sparco metal pedals (heel and toe)
• Numbered Tickford conversion badges (added to front seat bases)
• OEM locking wheel nuts
• 4 x Goodyear Eagle F1 GSD3 tyres (fitted in March 2009)
• 12mm rear wheel spacers (gives the same stance as the press cars)
• K&N panel filter
• Heat wrapped Piper stainless steel manifold
• OEM FRP back box and poly exhaust mounts
• O2, TPS, MAF and Cam sensors
• Heater control valve
• N/S driveshaft
• Idle pulley and Gates aux belt
• Drop links
• Rear N/S caliper
• Rear discs & pads
• 4 x ABS sensors and 1 x rear tone wheel
• Handbrake cable
• O/S track rod end
• O/S front wheel bearing

Comes with a folder full of receipts, 2 x keys (one remote and one normal). HPI Clear with certificate to prove.

2 x blue Ford Racing front seat covers will be included in the sale. Please note: the flat front wiper blades as seen in the pics have now been changed for standard items.

Religously cleaned once a week without fail. Always warmed up fully before going past 3,000 RPM.

I have owned the car since February 2009 and have loved every minute of it, a reliable, extremely fun and special car to drive.

No expense spared, I have spent near on £3,000 in the past 7 months of ownership. Reluctant sale due to house purchase. Plenty more pics available on request.

£5,500 no more, no less.


















This post has been edited by FRP 192: 21 September 2009 - 08:37 PM


Ford Racing Puma #192

#2 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 10 September 2009 - 01:16 PM

I have just bought a standard 1.7 Puma, so am no longer looking to take anything in part exhange.

Ford Racing Puma #192

#3 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 17 September 2009 - 09:02 AM

Price now reduced.

Ford Racing Puma #192

#4 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 21 September 2009 - 08:38 PM

Price now as low as I'm prepared to go...

Ford Racing Puma #192

#5 User is offline   Big Boy Al 

  • View gallery
  • Group: Members
  • Posts: 6825
  • Joined: 11-July 04
  • Location:kent

Posted 21 September 2009 - 08:59 PM

stunning frp for that price far too cheap in my opinion but if you need rid then needs must.

someone is going to get a lovely example of an frp at that price.

ja_cool.gif
Posted Image
FRP 241 RINGMEISTER -23 LAPS = 296.7 MILES COMPLETED, MORE TO COME NEXT YEAR

#6 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 22 September 2009 - 01:23 PM

Thank you Al biggrin.gif

Ford Racing Puma #192

#7 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 24 September 2009 - 08:49 AM

Now open to part exchange offers smile.gif

Ford Racing Puma #192

#8 User is offline   dannyeprice23 

  • Group: Members
  • Posts: 139
  • Joined: 05-October 08
  • Location:north wales, holywell

Posted 24 September 2009 - 09:20 AM

whats it currently going for? i own the bullit, but whenever i see a mint puma, i cant help but buy it!!! i may have a problem!
FRP (No 392) powered Bullit- with LSD,Helix clutch, Powerflex bushes, Unichipped to 177bhp, lowered on HR coilovers, league 17" matte black alloys,Aluminium Hi Spec 325mm 4pots (slightly modified to fit behind wheel they are that big) with 325mm discs, ST170 rear discs,FRP engine with racing mounts, Pipercross induction kit, custom built stainless steel exhaust system with FRP sportcat and custom stainless steel backbox,FRP shotpeened gearbox,FRP splitter,uprated Piper cams (1mm more lift than FRP),Pumabuild ported cylinder head,Tints, Blue Samco hose kit,Push button start,FR battery gauge,Clifford auto start alarm immob,PIIA bulbs,Imperial Blue front strut brace,Stainless Steel diamond cut mesh in lower grill,shiny chrome engine bits, imperial blue racing engine cover, FRP splitter, ABS mud guards, black puma badges, 6 cd autochanger. Built as first feature car by pumabuild and appeared in magazines....

#9 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 24 September 2009 - 12:08 PM

£5,500 no more, no less smile.gif

Ford Racing Puma #192

#10 User is offline   FRP 192 

  • Group: Members
  • Posts: 48
  • Joined: 12-February 09
  • Location:Cambridge

Posted 06 October 2009 - 01:14 PM

Sold

Ford Racing Puma #192

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic