Pumapeople: Pressure (?) Switch To Left Of Box Filler Plug - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Pressure (?) Switch To Left Of Box Filler Plug

#1 User is offline   Pumagritte 

  • Group: Members
  • Posts: 34
  • Joined: 20-November 07

Posted 05 July 2017 - 11:43 AM

(1.7 Puma) Being a bit lazy asking but, I have a slight leak from what looks like a pressure switch approx 3" / 75mm to the left of the gearbox filler plug. What does this switch do / indicate ? Is it important - can I remove it and substitute a regular screw plug ? Thank you for any responses.
In life man sits upright in the front. In death he lies down in the back.

#2 User is offline   happy-kat 

  • Group: Admin
  • Posts: 21746
  • Joined: 10-February 03
  • Location:Sarnian abroad

Posted 05 July 2017 - 02:36 PM

Think that is the reversing sensor as a guess from memory. There is also a speed sensor so it might instead be that one.
searching is fruitful | I'm a sponge not a mechanic | The Wiki is cool, please do check there if stuck with a Puma problem whilst waiting for a reply | For the Puma fan this read 'The Inside Story Book' is very nice to own link coming soon

#3 User is offline   Pumagritte 

  • Group: Members
  • Posts: 34
  • Joined: 20-November 07

Posted 05 July 2017 - 02:59 PM

Thanks Happy-Kat - as you say it is the reverse switch.
In life man sits upright in the front. In death he lies down in the back.

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic