Pumapeople: Fit 300Mm Brakes - Pumapeople

Jump to content

  • 3 Pages +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic

Fit 300Mm Brakes How to guide

#41 User is offline   big g 

  • Group: Members
  • Posts: 1616
  • Joined: 07-June 06
  • Location:norfolk

Posted 04 January 2013 - 01:01 AM

Fitment under 15'' wheels will depend on the wheel as even with grinding they may not fit
For props gti and Zetec s wheels you will need to run a 3 mm spacer and have the caliper and carrier ground down for clearance. It is also worth getting the wheels rebalanced if there are wheel weights on the inner edge of the wheel

#42 User is offline   big g 

  • Group: Members
  • Posts: 1616
  • Joined: 07-June 06
  • Location:norfolk

Posted 04 January 2013 - 01:01 AM

View PostRollcage, on 12 April 2012 - 12:09 AM, said:

I'd also be interested to know . I've read that the calliper needs machining, but don't know where to do this?

Cheers

I can grind the calipers to fit as I have a jig for it

#43 User is offline   martytay 

  • Group: Members
  • Posts: 15
  • Joined: 26-March 15
  • Location:France

Posted 05 April 2015 - 11:59 AM

Why 12.5mm drill? 12mm should be OK, no need to take off more material than needed :)

Share this topic:


  • 3 Pages +
  • 1
  • 2
  • 3
  • You cannot start a new topic
  • You cannot reply to this topic