Streetka alloys
#1
Posted 08 October 2003 - 11:30 AM
#2
Posted 08 October 2003 - 12:35 PM
#3
Posted 08 October 2003 - 12:44 PM
#4
Posted 08 October 2003 - 05:53 PM
PCD stands for Pitch Circle Diameter, which translates into the number and distance from the centre of the stud holes and to the centre of the wheel. The Ka shares the same PCD as the Fiesta, Puma, and many other Ford models up to some Mondeos and Granadas: 4-108. This means that there are four studs, with a distance of 108mm from the centre of the stud hole to the centre of the wheel.
Loving my new S2000 :)
#5 Guest_Cooler King_*
Posted 08 October 2003 - 06:43 PM
they are nice though!!!! id consider them myself is i wasnt after a set of frp wheels!
#6
Posted 08 October 2003 - 06:46 PM
They should look good though.
Ex-FRS #2787 - Ex-FRP #383
#7 Guest_daveyk_*
Posted 08 October 2003 - 11:32 PM
#8
Posted 09 October 2003 - 12:53 AM
Out of my Mind Back in 5 mins....
#9
Posted 09 October 2003 - 12:07 PM
they are nice though!!!! id consider them myself is i wasnt after a set of frp wheels!
FRP wheels won't fit staright onto standard Puma hubs, if that's what you've got (unless you use spacers)
#10
Posted 09 October 2003 - 12:12 PM
they are nice though!!!! id consider them myself is i wasnt after a set of frp wheels!
What about the Focus ST170 wheels, think they match the Puma well, and they do fit with small spacers, and I think you may get them cheaper.
Out of my Mind Back in 5 mins....
#11 Guest_Cooler King_*
Posted 09 October 2003 - 03:47 PM
#12
Posted 09 October 2003 - 06:59 PM
and if you need a replacement you will always be waiting for a second hand one to be available.
Personally go with the ST170 wheels at least you can buy them new in the first place.. and not some refurbed kerbed jobbies.
#14
Posted 10 October 2003 - 12:15 PM
#15
Posted 10 October 2003 - 01:02 PM
they will with spacers, cant imagine ford would produce a different set up solely for the mp3
Chaos, panic, & disorder - My work here is done
HEAD ZINCHEAD OF THE YELLOW POSSE
Save A Tree, Eat Some Beaver
#16
Posted 10 October 2003 - 01:05 PM
they will with spacers, cant imagine ford would produce a different set up solely for the mp3
They might possibly of done to keep the MP3 special? Allthough they are just 17 inch versions of some of the 15' alloys found on the new Fiesta
Out of my Mind Back in 5 mins....
#17
Posted 10 October 2003 - 01:10 PM
they will with spacers, cant imagine ford would produce a different set up solely for the mp3
They might possibly of done to keep the MP3 special? Allthough they are just 17 inch versions of some of the 15' alloys found on the new Fiesta
Nuthin special about a focus :twisted:
Chaos, panic, & disorder - My work here is done
HEAD ZINCHEAD OF THE YELLOW POSSE
Save A Tree, Eat Some Beaver
#18
Posted 10 October 2003 - 01:17 PM
FYI the wheels on the FRP are MiM Brescias...might be worth seeing if you can get these in the correct offset to begin with and save on buying spacers...might even do them as 18s
#19
Posted 10 October 2003 - 02:02 PM
FYI the wheels on the FRP are MiM Brescias...might be worth seeing if you can get these in the correct offset to begin with and save on buying spacers...might even do them as 18s
Well said that man. and like your new avatar
Chaos, panic, & disorder - My work here is done
HEAD ZINCHEAD OF THE YELLOW POSSE
Save A Tree, Eat Some Beaver
#20
Posted 11 October 2003 - 06:51 PM
They look fairly similar.
www.tdi-plc.com
www.universalracing.co.uk