Is it a worthwhile upgrade to fit the later Puma 260mm dia. discs and callipers to an early Puma which uses the 240mm discs ? Is there any noticeable difference ? Also, if I did, is it still ok to use the early 'black' master cylinder ? Thank you for any responses.
Page 1 of 1
Fitting Later Puma Discs And Calipers To An Early Puma
#1
Posted 26 August 2014 - 01:00 PM
In life man sits upright in the front. In death he lies down in the back.
#2
Posted 27 August 2014 - 02:26 PM
Pumagritte, on 26 August 2014 - 01:00 PM, said:
Is it a worthwhile upgrade to fit the later Puma 260mm dia. discs and callipers to an early Puma which uses the 240mm discs ? Is there any noticeable difference ? Also, if I did, is it still ok to use the early 'black' master cylinder ? Thank you for any responses.
Hi
This modification was the one of the first things that I did, and it will improve the brake power a litle more. Dont expect some major power brake with that, for better improvement change to the 300mm setup. I already did that to mine and now I have a MAJOR improvement. />
Oh, and keep the early black master cylinder, it will do the job very good even if you change to the 300mm front brakes and rear discs.
cheers
Share this topic:
Page 1 of 1