I have been looking at new seats on ebay and have seen quite a few fiesta st/ zetec s mk 6/7 seats.
Does anyone know the dimensions and if they would physically fit?
I am aware the sumframes will need modifying big time tho.
Thanks
Page 1 of 1
Fiesta St Seats Possible to fit in a puma
#2
Posted 19 April 2008 - 04:46 PM
They should physically fit, however on the mechanical front you might have a whole bunch of work to resolve.
#3
Posted 20 April 2008 - 10:08 AM
Yeah physical dimensions will be fine however it will take ages to try and sort the subframes and they will never be as strong as originally. I dont think anyway. Another problem you may have is the backs are bigger and tilting the seats forward for rear access may be an issue
#5
Posted 20 April 2008 - 02:30 PM
ohh realy, thanks for the heads up,
might be worth going for a test drive in an st then , good reasearch.
I quite like the milly seats, but they are rather dificult to get hold off.
might be worth going for a test drive in an st then , good reasearch.
I quite like the milly seats, but they are rather dificult to get hold off.
#6
Posted 20 April 2008 - 08:54 PM
The ST seats are definitely an improvement on the standard Puma seats ('99 on with mechanical height adjust). But I wouldn't go to the trouble of making them fit unless they just bolted straight in...
Even the earlier (pre '99) Puma seats are better IMO although some have problems with the cushion angle.
Even the earlier (pre '99) Puma seats are better IMO although some have problems with the cushion angle.
Share this topic:
Page 1 of 1