Power Steering Pipes 1.7
#1
Posted 09 March 2017 - 05:09 PM
Thanks for any advice.
#2
Posted 09 March 2017 - 07:54 PM
Where is the leak and does the car have air con?
#3
Posted 09 March 2017 - 08:43 PM
Ive just seen a post from pumagritte 10th June 2014 this is the same as what i have a problem with.
This post has been edited by Oates: 09 March 2017 - 10:02 PM
#4
Posted 09 March 2017 - 11:04 PM
http://www.ebay.co.u...S-/182333266243
Very common as the metal portion is exposed under the car and corrodes.
#6
Posted 12 March 2017 - 12:09 AM
#7
Posted 12 March 2017 - 03:20 PM
Keep me in mind if you get the parts back in ! CHEERS.
This post has been edited by Oates: 13 March 2017 - 09:01 PM
#8
Posted 14 March 2017 - 08:59 PM
Oates, on 09 March 2017 - 05:09 PM, said:
Thanks for any advice.
Iv'e just fitted new hose assembly to an FRP...why did they said it wasn't available when it is!
Chris
Denso Iridium Plugs
Helix Clutch
Mobil 1
#9
Posted 16 March 2017 - 06:21 AM
#10
Posted 19 April 2017 - 04:12 PM
#11
Posted 19 March 2018 - 01:47 PM
Thanks.
#12
Posted 21 March 2018 - 10:32 PM
Cheers.
#13
Posted 23 March 2018 - 03:43 PM
Got a friendly mechanic who will take a look at that and the PS pressure sensor as well. He knows Zetec-S 1.7 Puma engines well - he once built a car with two of them in it, one rear and one front, linked with some sort of clever driveshaft that could compensate for differences in output from each plus geering etc. No idea whether he ever got it running though...
Thanks.