Pumapeople: Rear Interior Panels - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Rear Interior Panels

#1 User is offline   postie 

  • Group: Members
  • Posts: 8
  • Joined: 14-March 12

Posted 16 March 2017 - 07:44 PM

Best way to remove rear interior panels thanks to some arse in sainsburys car park now have a dent in rear wing 😡😡

#2 User is offline   happy-kat 

  • Group: Admin
  • Posts: 21790
  • Joined: 10-February 03
  • Location:Sarnian abroad

Posted 16 March 2017 - 08:10 PM

Carefully removing the fixings, I've done it but can't recall the exact steps but the wiki has a rust article that might cover removing the inside rear panels as the article treat the areas revealed.
searching is fruitful | I'm a sponge not a mechanic | The Wiki is cool, please do check there if stuck with a Puma problem whilst waiting for a reply | For the Puma fan this read 'The Inside Story Book' is very nice to own link coming soon

#3 User is offline   Wild E Coyote 

  • Group: Members
  • Posts: 55
  • Joined: 15-April 11

Posted 19 March 2017 - 10:45 AM

You have 3 clips along B pillar. Be careful with them. Then go at back and take off the rear bench (completely). You will find screws along the way (at the end of bench) ending with the rear seat belt mechanism in the boot. One bolt is really good hidden, but you will find it. After that, the side panels are resting on two clips hanging from the rear window. To take the panel out lift it up by 2-3 cms and that will be it

Share this topic:

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic