Pumapeople: Clutch Will Not Bleed - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Clutch Will Not Bleed

#1 User is offline   postie 

  • Group: Members
  • Posts: 8
  • Joined: 14-March 12

Posted 24 August 2015 - 12:52 PM

Recently changed the clutch hose assembly owing to a split fitting on the slave cylinder end.But having major problems trying to get the system to bleed out.My problem appears to be the fluid is not been pushed round the system and the reservoir level is not dropping know matter how much you pump the pedal the fluid is reaching the master cylinder but that where it staysDid not have problem with the clutch until this fitting cracked have been told the clutch can be a problematic system to bleed Help����������

This post has been edited by postie: 24 August 2015 - 01:46 PM

#2 User is offline   happy-kat 

  • Group: Admin
  • Posts: 21811
  • Joined: 10-February 03

Posted 24 August 2015 - 05:54 PM

Hopefully Chris might have some ideas to help and spot this post soon.
searching is fruitful | I'm a sponge not a mechanic | please do try that if stuck with a Puma problem whilst waiting for a reply | For the Puma fan this read 'The Inside Story Book' is very nice to own sometimes still seen for sale

#3 User is offline   eldoodarino 

  • Group: Moderators
  • Posts: 6257
  • Joined: 12-March 03
  • Location:Nottingham

Posted 24 August 2015 - 07:09 PM

have you got a pressure bleeder ?

iv'e had this once or twice ..not nice
Wizards Of Nos 60hp progressive delivery.... yeah baby yeah :-o
Denso Iridium Plugs
Helix Clutch
Mobil 1

#4 User is offline   postie 

  • Group: Members
  • Posts: 8
  • Joined: 14-March 12

Posted 24 August 2015 - 07:35 PM

Got one on order hopefully that will overcome the problem not to kean on reverse bleeding and I thought my Capri was a bugger to bleed out😩😩😩

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic