My Frp And Big Plans
#41
Posted 14 July 2013 - 04:44 PM
#42
Posted 14 July 2013 - 06:47 PM
That produced 140 odd bhp at 8200rpm
Also head a ported head on a pinto which put out around 160bhp.
Highly polished exhaust and opened right up but rough to help the swirl and mix on the inlet.
Mk3 XR3i
R Reg 1.7 Puma
T Reg 1.7 Lux Puma
Now its Racing Puma 072
Graham
#44
Posted 15 July 2013 - 07:19 AM
Chris
Denso Iridium Plugs
Helix Clutch
Mobil 1
#45
Posted 15 July 2013 - 09:46 AM
#46
Posted 15 July 2013 - 10:54 AM
Projekt tread http://www.pumapeopl...pic=104790&st=0
Time, is the fire in which we burn
#48
Posted 15 July 2013 - 07:26 PM
Ryan93, on 15 July 2013 - 09:46 AM, said:
ah, i thought it looked a bit pukka
what sort of money would you be talking for the head work and new valves out of interest.??
a few quid i imagine..
Chris
Denso Iridium Plugs
Helix Clutch
Mobil 1
#49
Posted 15 July 2013 - 07:34 PM
#50
Posted 15 July 2013 - 07:36 PM
Sounds like an interesting drive..
have you got a completion date in mind yet?
Chris
Denso Iridium Plugs
Helix Clutch
Mobil 1
#51
Posted 15 July 2013 - 07:48 PM
Engine should be done in around 3 weeks will be waiting for a clear dyno for about a week, then probaly another 3 weeks till its running in the car im gonna try and get it done as quick as possible so could be less than that
#52
Posted 15 July 2013 - 07:56 PM
Denso Iridium Plugs
Helix Clutch
Mobil 1
#53
Posted 15 July 2013 - 08:32 PM
#54
Posted 16 September 2013 - 05:34 PM
Now pistons are sorted and have started building the engine.
Compression ratio is now also sorted with a little more off the block.
Washed everything off today put the shells, crank in and got it all torqued up
Then sorted the billet part of my inlet and took it to be anodised in aeroquip blue to match the fittings going to be in the fuel rail,
Painted oil pump,
The head is all built up ready for the inlet,Going to do ring gaps tomorrow then i can finish the bottom end ready for the head to go on,Bit of plating and painting then it should be about there, i have not decided on cam cover colour yet i was thinking blue.
Its all coming together pretty quick now
Just need to get a week of empty dyno time
This post has been edited by Ryan93: 17 September 2013 - 12:16 PM
#55
Posted 16 September 2013 - 07:48 PM
Denso Iridium Plugs
Helix Clutch
Mobil 1
#56
Posted 16 September 2013 - 07:49 PM
Denso Iridium Plugs
Helix Clutch
Mobil 1
#57
Posted 16 September 2013 - 08:31 PM
Im trying mate just been held up with things that i cant help unfortunately, im on it now though
#58
Posted 25 September 2013 - 06:27 PM
Forgot to take pics today so will add them later
#59
Posted 25 September 2013 - 07:04 PM
#60
Posted 25 September 2013 - 07:07 PM