Lsd Gearbox - Cheapest Place To Buy?
#1
Posted 11 May 2009 - 09:07 PM
Where should I get one from? Pumabuild list them for £840 ish...
Cheers!
#2
Posted 12 May 2009 - 06:50 AM
Run a search on here i think it's been discussed before as to how it can be done.
Other than that i think you'll struggle to get a new LSD unit for less than £700 ish
I can't find any helpful post on here, but i noticed the other day your on ZSOC too, this post may help you...
http://www.zsoc.com/forum/showthread.php?t...ighlight=yamaha
This post has been edited by Pnthrblkzs: 12 May 2009 - 06:57 AM
#4
Posted 12 May 2009 - 07:47 AM
Denso Iridium Plugs
Helix Clutch
Mobil 1
#5
Posted 12 May 2009 - 10:43 AM
Also, clutch's biting point is very high so I'm going to do that at the same time, rather than have it die on me
#6
Posted 12 May 2009 - 10:57 AM
Non LSD box but only £250
http://www.pistonheads.com/sales/992375.htm
Its not mine by the way.
#7
Posted 12 May 2009 - 12:17 PM
Helix clutch,Polished & ported head,green filter,Piper 270 Cams,denso irridium spark plugs,red magnecor 8,5mm spark leads,AVO Coil over,powerflex,Vibra Technics everywhere,Samco engine,braided brake hoses,Milltek full exhaust Sport cat,4 disks brakes 278mm Cosworth front,Focus rear,no ABS,Dot 5.1 brake fluid, DS 2500 brake pads,Toyo R888 semi slicks, interior stripped to lighten the car,HID's,2 Red sparco Evo seats,4 points 3" harnesses.
Daily car '04 Lexus Ls 430 ultra luxury,'73 Mazda RX 2,'78 Baboulin french brand dune buggy,'05 Renault Clio RS Lhd red Trophy 40/50 from Switzerland,'81 Citroen 2 cv...
#8
Posted 12 May 2009 - 02:05 PM
rebuilt to gearbox - £80 (jacks in paisley)
remove and put back in gearbox - free
thats what i did
Now With: Helix Clutch, L.S.D, Carbon Bonnet & Splitter, Aero wipers, Speedlines, poly bushed, White alcons, Magnecore 8.5mm Leads, Osram Conversion, White and Blue Engine Bay, Stripped interior, Green Stuff Pads, smoked repeaters, miltek system with decat, Hispec Discs, Paradas.
Later: Retrimed Sparcos, More Carbon, Full Weld in Roll Cage, Respray, Anthracite Speedlines, More POWER!!!!
#9
Posted 12 May 2009 - 02:59 PM
rebuilt to gearbox - £80 (jacks in paisley)
remove and put back in gearbox - free
thats what i did
What did they do during the rebuild mate?
#10
Posted 12 May 2009 - 08:23 PM
they have to grind off a small amount from the casing to fit but is pretty staight forward, they didnt go into any detail though
Now With: Helix Clutch, L.S.D, Carbon Bonnet & Splitter, Aero wipers, Speedlines, poly bushed, White alcons, Magnecore 8.5mm Leads, Osram Conversion, White and Blue Engine Bay, Stripped interior, Green Stuff Pads, smoked repeaters, miltek system with decat, Hispec Discs, Paradas.
Later: Retrimed Sparcos, More Carbon, Full Weld in Roll Cage, Respray, Anthracite Speedlines, More POWER!!!!
#12
Posted 12 May 2009 - 10:18 PM
#13
Posted 12 May 2009 - 10:54 PM
I thought it was a Quaife or material like that...I'm disapointed.....because I have a spare ERST S2 on my garage
#14
Posted 13 May 2009 - 06:17 AM
This post has been edited by philalix: 13 May 2009 - 06:18 AM
Helix clutch,Polished & ported head,green filter,Piper 270 Cams,denso irridium spark plugs,red magnecor 8,5mm spark leads,AVO Coil over,powerflex,Vibra Technics everywhere,Samco engine,braided brake hoses,Milltek full exhaust Sport cat,4 disks brakes 278mm Cosworth front,Focus rear,no ABS,Dot 5.1 brake fluid, DS 2500 brake pads,Toyo R888 semi slicks, interior stripped to lighten the car,HID's,2 Red sparco Evo seats,4 points 3" harnesses.
Daily car '04 Lexus Ls 430 ultra luxury,'73 Mazda RX 2,'78 Baboulin french brand dune buggy,'05 Renault Clio RS Lhd red Trophy 40/50 from Switzerland,'81 Citroen 2 cv...
#15
Posted 13 May 2009 - 02:33 PM
I thought it was a Quaife or material like that...I'm disapointed.....because I have a spare ERST S2 on my garage
they are both ib5 gearboxes but have differnet gearing not sure what else is differnent
Now With: Helix Clutch, L.S.D, Carbon Bonnet & Splitter, Aero wipers, Speedlines, poly bushed, White alcons, Magnecore 8.5mm Leads, Osram Conversion, White and Blue Engine Bay, Stripped interior, Green Stuff Pads, smoked repeaters, miltek system with decat, Hispec Discs, Paradas.
Later: Retrimed Sparcos, More Carbon, Full Weld in Roll Cage, Respray, Anthracite Speedlines, More POWER!!!!
#16
Posted 05 June 2009 - 01:08 PM
Managed to get hold of one of these (arrived this morning). Has anyone got any pics of where needs modifying to get it to fit??
Car getting a new clutch fitted very soon so would be beneficial to have this fitted at the same time