Calm Charity Track Day Car charity track day car
#1
Posted 15 June 2015 - 07:28 PM
I have decided to make my first ever track day car to help raise awareness of this charity so men who maybe in need can get help and support
i have a w reg puma 1.7 vvt i have a rough idear of what im going to do but your expert opinions and advise is what i need im going to start lightening it tomorrow (ill post photos then)
because of funds this is going to be a very long build but ill keep you up to date as much as i can
#2
Posted 16 June 2015 - 11:13 AM
The Puma is very enjoyable on track as it is.
Could start with ensuring mechanically sound, suspension, brakes, tryes, fluids in top form etc.
Put graphics on the Puma and start using it.
#3
Posted 16 June 2015 - 07:02 PM
but the engine and gear box runs real nice!!
Started stripping it down today to make it lighter i cant upload photos so if someone wants to let me know how
thanks
#4
Posted 16 June 2015 - 09:21 PM
#5
Posted 16 June 2015 - 09:48 PM
#6
Posted 17 June 2015 - 06:20 PM
You will not see the Gallery in mobile view.
#8
Posted 17 June 2015 - 07:03 PM
">
">
">
">
">re she is
">
This post has been edited by elliottxz: 17 June 2015 - 07:17 PM
#9
Posted 17 June 2015 - 07:05 PM
would you recommend removing roof lining ?
I cant afford upgrades yet so im stripping weight any suggestions how ?
This post has been edited by elliottxz: 17 June 2015 - 07:21 PM
#10
Posted 17 June 2015 - 07:26 PM
It will get noisey inside without the fabric to absorb sound.
#11
Posted 17 June 2015 - 10:27 PM
#12
Posted 18 June 2015 - 06:04 AM
Fledge do you have a photos of yours ?
I know what i want performance wise i want
Ap sports coilovers
uprated st150 brakes
rear disc convertion
Alxe spacers
wheel spacers
new plugs coil and leads
clutch off a 1.8 focus
frp air box mod
new hoses and brake lines
is there anything im missing ?
Where can i get some cheap door cards
And if anyone is selling some dirt cheap seats pet me know and i mean dirt cheap
#13
Posted 18 June 2015 - 06:18 PM
#14
Posted 18 June 2015 - 09:04 PM
Fledge, on 18 June 2015 - 06:18 PM, said:
Just had a look and it looks awesome !! Im not going to totally remove the dash tho im just going to flock it.
So could i just like a peace of perpex as a door card ? And just rivet it in ?
#15
Posted 18 June 2015 - 09:28 PM
This post has been edited by elliottxz: 18 June 2015 - 09:31 PM
#16
Posted 18 June 2015 - 09:33 PM
I have a standard Puma clutch in mine. Depends how many track days realistically you are going to do.
http://www.pumapeopl...ng_an_ST_Clutch
Axle spacers and wheel spacers on a track orientated Puma, I'd save the money.
Have a look at Scubsteve track prepared Puma for a not so race orientated project.
#17
Posted 18 June 2015 - 09:34 PM
found this hole but the top block at rambo welding has offered to do it for free for me
This post has been edited by elliottxz: 18 June 2015 - 09:38 PM
#18
Posted 18 June 2015 - 09:37 PM