My Silver Puma
#822
Posted 04 September 2012 - 05:44 PM
Projekt tread http://www.pumapeopl...pic=104790&st=0
Time, is the fire in which we burn
#823
Posted 05 September 2012 - 05:48 PM
FRP 245 - sold, then killed by new owner!
FRP 225 - sold in 2013 and regretted it ever since!FRP ??? - Now after another one after two years of Fiesta ST2 ownership.
#824
Posted 08 September 2012 - 04:31 PM
Car handled splendidly, tyres made shit loads of difference, i thought the rear was going to be quite slidey but it wasnt, nice and stable.
Need more power though, I always say this every time i go out but i do, most stuff im doing in the corners they realise and pull over to let me past but i cant get passed on the straights, was having a crack against a 306 gti 6, and again was wanting to come past in the corners, and to be fair he realised and pulled over but we were always dead level on the straights oh well it will come soon, and the car is perfect now for more power.
Vids, didnt get any, I did try but my camera turned off halfway through and didnt save anything i was only left with my lap times on my phone, 1.22.89 was my best, no idea if thats shit, good or crap, probably crap.
Did get some pics though and i think there is more to come from dave, car seemed to get a lot of interest on the stand actually which i was quite surprised about, and oddly i think a lot of faster stuff was scared to overtake me up the straights as i think they thought it was faster than it was
Some pics
tell you though todays delays with the sessions has put me off session days, think im going to stick to track days now, going to hopefully get involved with brands hatch at the start of november so loads of proper vids etc then
#825
Posted 08 September 2012 - 04:38 PM
Projekt tread http://www.pumapeopl...pic=104790&st=0
Time, is the fire in which we burn
#827
Posted 09 September 2012 - 11:35 AM
My Hague is no use now unless I get a solid mount for it.
#829
Posted 09 September 2012 - 04:00 PM
ebay
removed lambda and in place
old lambda
dont suppose if anyone knows if this is the same as the pre cat, with a view to keeping it spare incase the pre cat one goes?
#831
Posted 12 September 2012 - 06:32 PM
here what is was like, you can actually see the black mark where the tyre touched
folded it over with a large pair of pliers, this is also what they did with the frps having 17's im led to believe
from inside the engine bay
coat of por15
gave it quite a bit more lows on the front
#832
Posted 12 September 2012 - 08:25 PM
Have you painted po15 on the rest of your inner arch, looks like you might have.
#834
Posted 13 September 2012 - 12:55 PM
It might be worth putting a cable tie around the front piston strut to work out how much suspension travel you have before running out (you will either bottom out on the bump stop or the tyre will hit the chassis). If and when the tyre hits the chassis its not good news and the suspension instantly goes solid rather than dampening out on the bump stop.
Stop being spoon fed and GOOGLE it!
#836
Posted 23 September 2012 - 08:53 PM
cheers kieran
This post has been edited by happy-kat: 24 September 2012 - 09:03 PM
Reason for edit: removed the quote with pictures
#839
Posted 20 November 2012 - 08:44 PM