Warning Anyone With Miltek 4-2-1 Manifold 56k warning.
#61
Posted 28 April 2007 - 01:05 AM
I have to say it looks like you made a much neater job of it than I did!!
#62
Posted 28 April 2007 - 08:06 AM
FRP 241 RINGMEISTER -23 LAPS = 296.7 MILES COMPLETED, MORE TO COME NEXT YEAR
#63
Posted 28 April 2007 - 08:24 AM
alan did yours jus stick straight on? i cleaned the area then tried to stick it on but it kept falling off. still got some left but wanted to make sure i wasnt doin nethin wrong?
130 bhp upgrade and handling that makes the puma feel useless on a corner
now thats money better spent.
#64
Posted 28 April 2007 - 08:27 AM
im gonna stick it back with something this weekend.
but most of it has stayed on .
perhaps the cleaner you used stopped it sticking or it was still a bit wet??
This post has been edited by Big Boy Al: 28 April 2007 - 08:28 AM
FRP 241 RINGMEISTER -23 LAPS = 296.7 MILES COMPLETED, MORE TO COME NEXT YEAR
#65
Posted 29 April 2007 - 09:26 PM
#66
Posted 21 March 2008 - 09:35 AM
FRP 245 - sold, then killed by new owner!
FRP 225 - sold in 2013 and regretted it ever since!FRP ??? - Now after another one after two years of Fiesta ST2 ownership.
#67
Posted 25 March 2008 - 04:17 PM
im gonna stick it back with something this weekend.
but most of it has stayed on .
perhaps the cleaner you used stopped it sticking or it was still a bit wet??
My Miltek system came when I bought the car,A Big thanks to the previous owner .....Lovely job whoever fitted it too.Fantastic sound when you blast it and kindoff muted when the fuzz is arround,but ta for tips will keep an eye on it.Only done 15mile round trip to work since i got the car in Janaury,
Steve
#68
Posted 01 October 2008 - 07:26 AM
but what i was talking to other people with mostly ford focus, noone has that shield on sport manifold and there is no problem with it...
#69
Posted 01 October 2008 - 12:15 PM
no that is not for the heith shield
that is to fix it to the lower fixing braket
#70
Posted 02 February 2009 - 09:03 AM
#71
Posted 02 February 2009 - 10:11 AM
Mine grates a bit over the odd speed hump, but not enough to bother me.
Signature block created by Colin Y (BOK) & here as my tribute to him
Print your own Pumapeople fliers by clicking here
PUMA GARAGE LIST LINK
Tremona Garage
#72
Posted 22 February 2009 - 11:08 PM
"i have smelt burning/melting ever since i got the car a year ago and always just didnt worry about it!!"
well if i'd smelt burning/melting there's no way i'd just ignore it for a yr!! the minute i smelt it i'd have had the bonnet open & would've spent as long as it took to find where it was coming from!!
Craig
#73
Posted 25 May 2009 - 01:27 PM
#74
Posted 25 May 2009 - 02:38 PM
Signature block created by Colin Y (BOK) & here as my tribute to him
Print your own Pumapeople fliers by clicking here
PUMA GARAGE LIST LINK
Tremona Garage
#75
Posted 25 May 2009 - 02:47 PM
#76
Posted 07 April 2010 - 06:20 PM
#77
Posted 07 April 2010 - 06:49 PM
FRP 241 RINGMEISTER -23 LAPS = 296.7 MILES COMPLETED, MORE TO COME NEXT YEAR
#78
Posted 19 May 2010 - 08:52 PM
Pick my FRP up with a milltec on, cant say that i have had any issues with the plastic section around the steering rack assembley but it seems ovious theres somthing a miss there, if the flow and back pressure are correct or unless you drive it constanltly like you nicked it, there sshould not be a problem. If it was me i would check the cat and back box to see they are clear, then contact Milltec they would probley like to see whats happened, this is not really good press