[ALD]

The track on the racing puma is wider than a normal Puma but how much more is it?

Exact measurements please if you can help?

[Dogsbody]

Have a look here Clicky it might help.
The press cars had a 10mm wider spacer block on the back axle.
Ford dropped this on the "normal" FRP due to bearing load, but a few of use have added the 10mm back by one means or another

[Big Boy Al]

They are 33.7mm wider

[ALD]

Big Boy Al, on 24 January 2010 - 08:10 AM, said:

They are 33.7mm wider

Is that the back or the front?

[Dogsbody]

Big Boy Al, on 24 January 2010 - 08:10 AM, said:

They are 33.7mm wider

You Geek Alan

[BurfyBoy]

Its on the parts list Graham

Lower 'A' Arm (+33.7mm) RHLower 'A' Arm (+33.7mm) LH
The rear had 20mm spacers as standard but I dont know how much wider the disc setup would differ over the drum setup??

[FlashBastd]

IIRC disc setup adds a further 14mm per side.

[Dogsbody]

So its 0.3mm wider at the back than the front then.


Rob, I was taking the mick a bit after seeing Alan's comment in the similar post of FRP forum