This post has been edited by Keith Dover: 04 May 2013 - 09:37 AM
Page 1 of 1
Front Bumper Gap Help ? Gap between bumper and light.
#1
Posted 03 May 2013 - 08:36 PM
Can anyone help? A large gap (5-7mm) has appeared between the bumper and the headlight (driver's side). In a few weeks I'm going to be changing the n/s wing so the bumper will be removed. Will it be possible when refitting the bumper to close the gap? It's possible someone may have reversed into the bumper but from what I can see there is no visible damage to bumper or headlight. Any advice or tips would be greatly appreciated.
#2
Posted 05 May 2013 - 01:16 PM
The same thing has happened to mine! Can anyone advise please? Tony
#3
Posted 05 May 2013 - 02:45 PM
There is some adustment in the bumper, and wing, depending on why the gap has apered in the first place, it should be posible to adjust the gap
1998 Puma 1.7 Replica FRP. innlet nr 138
Projekt tread http://www.pumapeopl...pic=104790&st=0
Time, is the fire in which we burn
Projekt tread http://www.pumapeopl...pic=104790&st=0
Time, is the fire in which we burn
Share this topic:
Page 1 of 1