Pumapeople: Rear Beam Spacer Increase - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Rear Beam Spacer Increase

#1 User is offline   RogS500 

  • Group: Members
  • Posts: 16
  • Joined: 09-February 13

Posted 10 March 2014 - 07:19 PM

Hi,

Can anyone advise please, on if it is possible to fit extra 12mm spacers between the rear beam and retain the ABS sensor gap on a 1700cc, year 2000 Puma?

I can only assume this has been done many times. We would like to keep the ABS at this moment in time ( MOT due soon ) but future plans may see the ABS discarded.

Many thanks in advance.

#2 User is offline   RogS500 

  • Group: Members
  • Posts: 16
  • Joined: 09-February 13

Posted 16 March 2014 - 08:23 AM

Looked at this myself yesterday, and it is easy to retain the ABS sensor with the beam spacers.




As the sensor is attached to the hub back plate, it needs to be unbolted and then threaded through the middle of the new spacer and then bolted back into it's original position.









#3 User is offline   happy-kat 

  • Group: Admin
  • Posts: 21811
  • Joined: 10-February 03

Posted 16 March 2014 - 10:14 AM

The FRP rear spacer is behind the hub.
This is related read
http://www.pumapeopl...ear_Hub_Spacers
You can just make the spacer out here.
The rust is all gone now.
Posted Image
searching is fruitful | I'm a sponge not a mechanic | please do try that if stuck with a Puma problem whilst waiting for a reply | For the Puma fan this read 'The Inside Story Book' is very nice to own sometimes still seen for sale

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic