Several coats of Dymax UB on the front arch areas.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_21731.jpg)
Also cleaned up and treated the horn with Hydrate 80 for the rust and then the Dymax UB.
If this was a mroe road facing area I would have applied 4 to 5 coats rather than the 2 or might have been 3.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_44618.jpg)
This lower area got 3 coats though.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_26825.jpg)
Found rust on the inside of the mesh so treated that after a clean up with Hydrate 80.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_53222.jpg)
Did the exposed bits of te underside too.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_129900.jpg)
Spraed Dymax S-50 into the seam of the subframe and moved the beam around to get it to run all along the seam end to end.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_64752.jpg)
Rear beam previously done matches the front.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_53499.jpg)
Took two evenings to put it all back together, was nNot torqued up but Olly's garage is only a short distance away so drove there last night and Olly did a thorough job check on the ramp and did the final torque up.
Olly has been looking after my FRP since Feb 2002 and before that he had been looking after 0042 and had met Peter Beattie so luckly for me I can still use Olly as he is so close and is a right petrol head. Whilst I have also used Alan at Pumabuild some jobs are too far away for the distance.
With the support of Steve (thank you) using these was deffinately worth it because the subframe can be nothing other then in the right place. Whilst on the ramp I double checked the pins still went in.
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_52528.jpg)
All back together and torqued up. Olly possing, thankfully his mechanical skills are much better then his photogenic
![Posted Image](http://www.pumapeople.com/stuff/1335634134/gallery_30_274_45395.jpg)
Owen Garages Haywards Heath.