St150 Brakes
#1
Posted 23 July 2014 - 06:30 PM
#2
Posted 24 July 2014 - 07:42 AM
Doesn't cover the ST150 though.
http://www.pumapeopl..._Brake_Upgrades
#3
Posted 02 August 2014 - 07:13 AM
#4
Posted 02 August 2014 - 08:53 AM
#5
Posted 02 August 2014 - 09:14 AM
#6
Posted 02 August 2014 - 09:25 AM
#7
Posted 02 August 2014 - 12:31 PM
johnpidge, on 02 August 2014 - 09:14 AM, said:
http://www.bremboaft...25-3b5be4955e71
Here it is. I just had cut the SS steel (3 mm thickness is enough) as per scheme.
OD is 146 mm, 4 holes (13,75 mm D) at 90 degrees apart and PCD is 107,95 mm.
Inner D is 63,7 mm.
Take a look at face of the disc and do the same!
#8
Posted 02 August 2014 - 12:34 PM
johnpidge, on 02 August 2014 - 09:25 AM, said:
Should do. I just felt it was more secure to replicate the full facia contact between the whee and the hub as it is between the disc and the wheel
#9
Posted 02 August 2014 - 12:38 PM
#10
Posted 11 August 2014 - 09:43 AM
#11
Posted 12 August 2014 - 11:58 AM
#12
Posted 12 August 2014 - 12:02 PM