Pumapeople: Ford Puma 1.7 Black X-Reg Spares/repairs/project 100351 Miles Thatcham, Berks - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Ford Puma 1.7 Black X-Reg Spares/repairs/project 100351 Miles Thatcham, Berks

#1 User is offline   ls5596 

  • Group: Members
  • Posts: 5
  • Joined: 23-March 09

Posted 11 February 2017 - 10:10 AM

Ford Puma 1.7 Black X-Reg Spares/repairs/project

100351 Miles

Location: Thatcham, Berks

Leather interior Needs a fair bit of work of work, and I've already replaced it hence sale. As these cars are getting rare, I thought I should check here first. As it failed the MOT I'll be scrapping this by Tuesday, so please arrange to collect it before then if you are interested.

Offers over scrap value considered.

Motor - cambelt, water pump, and timing belt replaced at 86708 miles. It's been completely reliable for me.

MOT expires 15 Feb 2017.

MOT refusal:
1. Stop lamp remains on when brakes are released (not sure I agree, I cannot recreate this problem)
2. Tyre has ply or cords exposed offside front
3. Tyre has ply or cords exposed nearside front
4. Seat belt anchorage prescribed area is excessively corroded nearside (sill panel)
5. Vehicle structure has excessive corrosion which adversely affects braking or steering nearside rear (Axle Support Mounting Point Inner Sill Panel)
6. Road wheel bead rim badly distorted nearside front

Advisories:
7. Headlamp deteriorated but light output not reduced offside
8. Exhaust Front pipe Flexi Gauze deteriorated
9 Rear exhaust retaining clip adrift
10 Tyre worn nearside rear
11 Offside rear tyre deteriorated
12 Brake pipe slightly corroded offside front
13 Brake pipe slightly corroded nearside rear
14 Corrosion in offside and outer sill panels
15 offside steering rack gaiter twisted
16 road wheel with a slightly distorted bend rim offside front

2 previous owners, happy to pass on paperwork for previous service history.

This post has been edited by ls5596: 13 February 2017 - 01:16 PM


Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic