Pumapeople: Stabilizer Bar Bushing - Pumapeople

Jump to content

Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

Stabilizer Bar Bushing anyone knows the way?

#1 User is offline   ALister Crowley 

  • Group: Members
  • Posts: 79
  • Joined: 24-June 08
  • Location:Russia, Moscow

Posted 02 May 2010 - 06:35 AM

Just bought powerflex bushes. Neve chenged them before. Anyone knows how to replace them without removing the crossmember? (One of the bolts in the bush bracket cannot be fully removed without hard crossmember job)
Thank you
Puma 1.7 8/2000

#2 User is offline   bathblade 

  • Group: Members
  • Posts: 27
  • Joined: 25-February 09
  • Location:Barnstaple, UK

Posted 02 May 2010 - 07:27 AM

View PostALister Crowley, on 02 May 2010 - 06:35 AM, said:

Just bought powerflex bushes. Neve chenged them before. Anyone knows how to replace them without removing the crossmember? (One of the bolts in the bush bracket cannot be fully removed without hard crossmember job)
Thank you


Did mine yesterday. Remove the bolt you can get to, bend the bush cover up. Take out the old one, move in the new one. Bend the cover back down and put the bolt back in.

The cover maybe a bit stiff, but it will bend out of the way enough. Moving the bushes in and out was the hardest, but try some washing up liquid to help them move along the bar easier.

Shaun

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic